Affiliate links may earn us a commission. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure

Samsung 9E: Low water level error

Source: Samsung support page (opens in a new tab) ↗ · Updated

Status code9ESamsung
What does Samsung 9E mean?

Low water level error: there is not enough water in the dishwasher.

Homeowner part this code names: dishwasher detergent.

Search on Amazon

Opens an Amazon search for that name. Check the size against your manual. As an Amazon Associate I earn from qualifying purchases.

How it shows: Dishwasher display shows 9E

Likely causes

  • Samsung does not list a specific cause for this code

How to fix 9E: safe DIY steps

  1. Empty the dishwasher
  2. Add detergent, then run a normal cycle
Safety firstSwitch the dishwasher off at its breaker before you reach into the base or remove a filter or cover, and let the tub and water cool after a cycle. Watch for sharp debris. Pump, heater, valve and control-board repairs belong to a qualified appliance technician.

Capacitors can hold a charge after the power is off. Safety terms.

When to call a pro

If the error still occurs, switch off power to the dishwasher at the circuit breaker and request service through Samsung's Support Center.

Request Samsung service (official service page, opens in a new tab) ↗

Email me this fix

We save your email and this page. Nothing is emailed. We'll only use your email for this request.

Privacy. Deletion requests go to the address on that page.

Parts & tools for this fix

Taken from this code's causes or steps. A search link opens Amazon results and does not confirm a fit. Check the model number in the manual.

As an Amazon Associate I earn from qualifying purchases.Affiliate disclosure

Related Samsung dishwasher codes

All Samsung dishwasher codes →Browse every code