Status codeEASGoodman
What does Goodman EAS mean?
R-32 sensor fault: heating stops and only the fan runs while the furnace is in mitigation mode.
Call a pro: jump to when to call a pro Equipment type: furnace
How it shows: 7-segment display on a *R9S96, *D9S96 or *R9S92 single-stage furnace in IOG-2037B: EAS
Likely causes
- R-32 sensor fault while the furnace is in mitigation mode
Safe checks for EAS
- Write down EAS. Heat is off and the fan can still be running
- Technicianthe chart says to investigate the R-32 sensor and replace it
Safety firstIf you smell gas, do not touch any electrical switch or use a phone in the building; leave immediately and call your gas supplier from outside. Turn off electrical power at the furnace switch or breaker before opening any panel, and never bypass or jumper a limit, rollout or pressure switch. Gas valve, burner, venting, wiring and control-board work should be done by a licensed HVAC technician.
Capacitors can hold a charge after the power is off. Safety terms.
When to call a pro
Call a licensed HVAC technician. EAS is the sensor-fault mitigation code, not the leak code EAL and not the lost-communication code EAF.
Find a Goodman dealer (official locator, opens in a new tab) ↗Email me this fix
We save your email and this page. Nothing is emailed. We'll only use your email for this request.
Request a filter and maintenance reminder
We save your email, this page, and the interval you pick. Nothing is emailed. We'll only use your email for this request.