GE C3: The dishwasher will not drain

Source: GE support page (opens in a new tab) ↗ · Updated

Status codeC3GE
What does GE C3 mean?

The dishwasher will not drain.

Basic checks first: jump to safe DIY steps Equipment type: dishwasher
How it shows: Dishwasher display shows C3

Likely causes

  • GE does not list a specific cause for this code

How to fix C3: safe DIY steps

  1. Disconnect the power at the circuit breaker for about 30 seconds, then reset the dishwasher
Safety firstSwitch the dishwasher off at its breaker before you reach into the base or remove a filter or cover, and let the tub and water cool after a cycle. Watch for sharp debris. Pump, heater, valve and control-board repairs belong to a qualified appliance technician.

Capacitors can hold a charge after the power is off. Safety terms.

When to call a pro

If the problem persists, contact GE service.

Request GE service (official service page, opens in a new tab) ↗

Email me this fix

We save your email and this page. Nothing is emailed. We'll only use your email for this request.

Privacy. Deletion requests go to the address on that page.

Related GE dishwasher codes

999Control reset needed, or a possibleC1Pump-out during drain has exceeded 2C2The total pump-out cycle exceeds 7C4The machine filled twice after aC5The pump-out time is too shortC6Water temperature is too low

All GE dishwasher codes →Browse every code