Status codeE27Bosch
What does Bosch E27 mean?
Low supply voltage: Bosch says the house power supply to the dishwasher is too low.
Call a pro: jump to when to call a pro Equipment type: dishwasher
How it shows: Dishwasher display shows E27
Likely causes
- Incoming voltage from the house supply is too low for the dishwasher, the cause Bosch gives
Safe checks for E27
- Switch the dishwasher off at the circuit breaker for 30 seconds, then switch it back on
- If E27 appears again, Bosch says to have an electrician check the incoming voltage to the appliance
Safety firstDo not open the dishwasher's junction box or measure live voltage yourself; checking the supply at the appliance is electrician work. Switch the dishwasher off at its breaker before you reach into the base or remove a filter or cover, and let the tub and water cool after a cycle. Watch for sharp debris. Pump, heater, valve and control-board repairs belong to a qualified appliance technician.
Capacitors can hold a charge after the power is off. Safety terms.
When to call a pro
Bosch's step after a repeat E27 is a licensed electrician, not an appliance repair: the fault Bosch names is the house supply, not the dishwasher.
Request Bosch service (official service page, opens in a new tab) ↗Email me this fix
We save your email and this page. Nothing is emailed. We'll only use your email for this request.
Parts & tools for this fix
Taken from this code's causes or steps. A search link opens Amazon results and does not confirm a fit. Check the model number in the manual.
Multimeter for appliance and HVAC diagnosis: guide
In this code: Incoming voltage from the house supply is too low for the dishwasher, the cause Bosch gives
This one is for a technician to test or replace, so we only explain it and do not link to buy it.