Status codeContinuous onCarrier
What does Carrier Continuous on mean?
Control has 24 VAC power: a steady amber LED is not a fault code.
Basic checks first: jump to safe DIY steps Equipment type: furnace
How it shows: Amber status LED on a Carrier 59SC5 stays on, with no flashes
Likely causes
- The furnace control has 24 VAC power and is not flashing a status code
How to fix Continuous on: safe DIY steps
- A steady amber light matches the label's continuous-on line. It means the control has 24 VAC. It does not name a failed part
- If the furnace still has no heat, watch for a flash code and look that number up. A technician is the next step when there is no heat and the light never flashes a code
Safety firstIf you smell gas, do not touch any electrical switch or use a phone in the building; leave immediately and call your gas supplier from outside. Turn off electrical power at the furnace switch or breaker before opening any panel, and never bypass or jumper a limit, rollout or pressure switch. Gas valve, burner, venting, wiring and control-board work should be done by a licensed HVAC technician.
Capacitors can hold a charge after the power is off. Safety terms.
When to call a pro
Call a licensed HVAC technician if there is no heat and the LED stays on without a flash code. Continuous on is the powered, no-code state. Rapid flashing is reversed polarity, which is a different pattern.
Find a Carrier dealer (official locator, opens in a new tab) ↗Email me this fix
We save your email and this page. Nothing is emailed. We'll only use your email for this request.
Request a filter and maintenance reminder
We save your email, this page, and the interval you pick. Nothing is emailed. We'll only use your email for this request.